Non-invasive ventilator
Non-invasive ventilator Y-30T is Bi-level PAP (Bi-level Positive Airway Pressure) device intended to
provide non-invasive ventilation for patients with Respiratory Insufficiency. It is intended for adult
patients by prescription in the home or hospital/institutional environment. With its Target Tidal Volume
function and other excellent comfort features and effective performance, it offers each patient personal-
ized ventilation support.
Comfortability
Humidifier
Eco Smart heating system with innovative dual water chambers design delivers accurate water quantity control
with real time compensation, ensuring excellent humidifying capacity and improves comfort.
Easy to take off and clean.
Function to prevent overheating when water is out.
Inspiratory / Expiratory sensitivity
8 grades of I Sens and E Sens optimize the compliance of machine with the patient.
Efficiencies in Therapy
S/T Mode
Machine complies with patient breathing. However, if there is no inhalation for a certain period of time, the machine
will give a forced ventilation to ensure the minimum ventilation.
enefits of monitoring & supporting through cloud platform and patient self-management
A 12-month study in the United States in disease management such as Dewen and other studies have found
strengthened education, follow-up in patients with chronic obstructive that multi-dimensional integrated
pulmonary disease, showed that: management in patients can effectively
Reduction in hospital admission and emergency visits for COPD, reduce the medical cost of COPD by
particularly for cases due to non-infectious factors. about 11.7% per person.
uto Leak Compensation Inspiratory time control
The machine detects the leaks during treatment in real Tim min and Ti max could be set independently, avoiding
time and adjusts the baseline to ensure correct insufficient ventilation due to short inspiratory time. At the
triggering and related functions. meantime, cases can be prevented where expiratory
sensitivity is unable to meet due to large leaks.
Specifications
General Info
Dimensions: 170 mm × 180 mm × 118 mm
290 mm × 180 mm × 134 mm (with the humidifier)
Weight: 1.5 kg
2.5 kg (with the humidifier)
Water capacity: 350 mL at recommendedwater level
Ramp Key Parameters
The ramp time ranges from 0 to 60 minutes Target Vt: On/ Off
Humidifier 150~1500 mL
Humidifier Settings: off, 1 to 5 (95°F to 167°F Reslex: Patient, Off, 1~3
/ 35°C to 75°C) I Sens.: 1~8
Humidifier Output: No less than 10 mg H2O/L E Sens.: 1~8
SpO2
Res Rate: 3~40 BPM
Range: 0 to 100% Ti: 0.3-3.0s
Rise Time: 1~4Pulse Rate
Range: 40 to 240 BPM
Sound Pressure Level
< 30 dB, when the device is working at the
pressure of 10 hPa
Storage
SD card can record patient data and fault
information
AC Power Consumption
100 - 240 V AC, 50/60 Hz, Max 2 A